Ford Leveling Diesel Starter System - 05-16

Same front setup as the leveling kit with a 2" progressive spring lift in the rear with matching rear shocks. More travel, control and comfort than the stock Super Duty while sharing components with the custom tuned systems leaving infinite options for upgradability.

SKU: CS-FLVL-STR

Availability: In stock

From: $1,685.00

To: $3,685.00

Price as configured: $0.00

  • SKU: CS-FPAP-05

    - Built in the U.S.A. By Deaver Leaf Spring
    - Smooth progressive design
    - Supplied with U-bolts and hardware
    - Provides 2.0" of lift
    - The O.E.M. load capacity is still maintained while improved ride is achieved
    - Fitment: 2005-2007

  •  
  • SKU: CS-FPAP-08

    - Built in the U.S.A. By Deaver Leaf Spring
    - Smooth progressive design
    - Supplied with U-bolts and hardware
    - Provides 2.0" of lift
    - The O.E.M. load capacity is still maintained while improved ride is achieved
    - Fitment: 2008-2010

  •  
  • SKU: CS-FPAP-11

    - Built in the U.S.A. By Deaver Leaf Spring
    - Smooth progressive design
    - Supplied with U-bolts and hardware
    - Provides 2.0" of lift
    - The O.E.M. load capacity is still maintained while improved ride is achieved
    - Fitment: 2011+

  •  
  •  
  • SKU: CS-FFRA-LVL-05

    - For Leveling Systems
    - 1° of Caster correction engineered into arm.
    - Internal Gusseting
    - Limit Straps Included
    - 1/2" Additional Tire Clearance
    - Huge Johnny Joint at Frame Connection for longevity and bind free Cycling.
    - Fitment: 2005+

  •  
  •  
  • SKU: CS-FHMSS-08

    - Stainless Steel body
    - Custom Valved for Larger Tires, Adjustable Nitrogen Pressure
    - Hardened Nitride Shafts and Precision Bearings
    - Long Lasting Performance and Appearance
    - Replaces OEM Stabilizer
    - Fitment: 2008-2016
    - Works on leveled and lifted trucks. Not made to work at factory ride height.

  •  

Price as configured: $0.00

Description

The Super Duty Starter system is designed for people who want a small suspension lift without the stereotypical ride-quality degradation associated with mass-produced “lift and leveling kits”. The IFP Bilstein 5100 shocks build quality is unmatched for their price point offer a nice boost in ride quality and carry a lifetime warranty through Bilstein.


The truck will sit 2.5” higher in the front and have more wheel travel thanks to the taller, lighter rate coil springs. Stainless Brake Lines and an Adjustable Track Bar round off the front end geometry correction while Caster Shims improve on the stock handling. The rear is outfitted with a Progressive Add-a-Pack lifting it 2” and matching rear shocks help keep the truck planted over rough terrain while maintaining factory towing and payload capacity. The 2.5” systems are designed to work with trucks equipped with the 2” rear block. Super Duties equipped with a 3-5/8" tall block from the factory will require the factory 2" tall Block to achieve a leveled stance with the Add-a-Pack. Part Number: 7C3Z-5598-L and 7C3Z-5598-K.


This system is considered entry level; however, it’s fully upgradeable and only requires an upgrade to one of our many signature tuned shock packages to be converted to one of the higher-end systems. This system was designed with the Progressive Add-a-Pack and should not be run with the Full Progressive Leaf Springs.


Wheel and Tire:
On our 2.5” Ford Systems, we recommend 17”-18” wheels, no more than 9” wide with 5.5” of backspacing with Carli Fabricated Radius Arms or 5” Backspace with factory arms; 5” will require a bit more trimming. Tires, 37x12.5” will fit with some trimming; 35” will likely fit without trimming. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. For more details, see our article on wheel and tire selection and tire pressures:


Tires and Wheels: How Do They Affect My Ride?

System Notes

Wheels Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5"-5.5" of Backspacing on Leveling Systems
Tires 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R.
Recommended Configuration Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 35", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride.
Add-A-Packs Super-Duties equipped with a factory 3-5/8" Block will require the 2" Factory Block [7C3Z-5598-L, 7C3Z-5598-K] to achieve a level stance.

Fitment

Additional Info

Vehicle Year 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Engine Diesel
Model F250, F350
Lift Height 2 1/2"

Video & Instructions

Instructions

- Starter System Installation Instructions -


Videos and Media

COMING SOON!