Pintop – 3.25″

Pintop – 3.25″

From: $2,955.00

Our most popular system, the Pintop kit boasts 2.5″, Remote Reservoir King Shocks. Designed and tuned in house for the customer looking for substantial on-road and off-road performance improvement. Customers can expect a softer ride with more control and bottom-out resistance than the Backcountry.

This specific SKU is Custom Tuned to work with the Ram 3500’s equipped a Carli 3.25″ Lift System and Carli Progressive Leaf Springs.

These will NOT work on the leveling height, nor the Factory Air-Assist rear ends.


The Pintop system boasts Carli specific, blueprinted, King 2.5” shocks on all four corners. In an effort to provide customers with the best product, we designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy-duty truck platform; we then tuned the shocks around the custom pistons based on the only thing that matters to us, seat-of-the-pants feel.

We round off ALL our King shocks with shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather can’t hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts.

The shocks are finished with King oil good to -55° F. Note that all King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

Product Instructions for CS-DPT25SPKG-13-CONFIG

Instructions are not available at this time.

Product Media for CS-DPT25SPKG-13-CONFIG

Media is not available at this time.


Cancer and Reproductive Harm


Go to Top