From: $3,220.00

Front Lift Rear Lift Front Travel Rear Travel Shock Diameter Tire Fitment
3.0″ 2.5″ 8.6″ 9.1″ 2.0″ 35″ x 12.5″

The Commuter 2.0 system is designed for people seeking the best on-road ride quality on a budget. Utilizing Carli-Specific front and rear Fox 2.0” internal reservoir shocks, we’ve developed a Carli Signature shock tune that delivers all around comfort and ride quality designed for on-road, in town, highway, and low-shaft-speed trail use.

The Fox 2.0s are fully rebuildable, built with hour-glass bushings and boast extruded aluminum construction with a clear anodizing for corrosion resistance. Fox builds these shocks with their legendary red shock oil that flows well down to -55* F.

SKU: CS-JKU-C20-07-Config Category:


The front linear rate Carli springs will lift your Jeep JKU 3.0” while the rear is lifted 2.5” utilizing progressive coil springs.

When lifting the front end of a straight axle vehicle, the front axle is pulled off-center unless the proper linkages are addressed. This system includes an Adjustable Track Bar that’s designed to extend – we provide this measurement – to correct the driver’s side axle shift. Included in the system, we provide extended sway bar end links with spherical bearings to accommodate the extended travel and maintain the factory Rubicon Sway Bar Disconnect. The last piece of the puzzle; extended stainless brake lines ensure the bottom of the new travel stroke can be reached without ancillary component stress. A short billet bump riser is included to match the front shock travel.

To match the front, the rear is lifted 2.5” with a multi-rate coil spring ensuring a supple ride and reasonable carry capacity. The rear geometry being similar to the front, everything is included to support flawless operation of all components. A rear Track Bar Riser and adjustable track bar correct the axle position and minimize yaw (side to side movement of the body as the axle travels), Extended Sway Bar Links are included to accommodate the extended travel stroke as are Stainless Brake Lines and Brake Line Routing Bracket guiding the longer brake lines clear of all moving components. Fabricated rear bump risers.

Product Instructions for CS-JKU-C20-07-Config

Kit Instruction

Instructions – CS-JKU-C20(BC)(PT25)-07 – 2.5 Base Kit Instruction


Front  in order as listed in kit instructions: 

Instructions – CS-JK25LRC-F-07 – Linear Rate Front Coil Springs

Instructions – CS-JBSF-07-FOX (KING) – Front Billet Bump Riser

Instructions – CS-JBBLKIT-07 – Extended Brake Line Kit

Instructions – CS-JEL-07-F – Extended Sway Bar End Links, Front

Instructions – CS-JATB-07-F – Adjustable Track Bar, Front

Instructions – Jeep Shock Packages

Instructions – CS-JATB-07-R-RISER – Track Bar Riser, Rear


Rear in order as listed in kit instructions: 

Instructions – CS-JATB-07-R – Adjustable Track Bar, Rear

Instructions – CS-JK25MRC-R-07 – Multi Rate Rear Coil Springs

Instructions – CS-JBSR-07 – Fabricated Bump Riser, Rear

Instructions – CS-JEL-07-R – Extended Sway Bar End Links, Rear






Product Media for CS-JKU-C20-07-Config

Media is not available at this time.


Cancer and Reproductive Harm


Go to Top